Intratech Control Engineers

• Measure Humidity, Air Temperature (with built-in probe) plus non-contact InfraRed Temperature
• Pinless moisture sensor allows to monitor moisture in wood and other building materials with no surface damage
• Remote pin-type probe (MO290-P) for contact moisture readings (3ft/0.9m cable length)
• Select from multiple wood types and measurement ranges
• Easy to read, large dual display with backlit feature
• Simultaneously displays % moisture of wood or material being tested and Air Temperature, IR Temperature, or Humidity
• Pinless measurement depth to 0.75" (19mm) below the surface
• Non-Contact InfraRed Thermometer with 8:1 distance to spot ratio and 0.95 fixed emissivity
• Built-in Humidity/Temperature probe measures Relative Humidity, Air Temperature plus Grains Per Pound (GPP), Dew Point (DP), and Vapor Pressure
• Programmable high/low Moisture and Humidity alarms
• Automatic calculation of differential Temperature (IR - DP) to determine condensation point
• Min/Max and Data Hold, Auto Power Off
• Complete with battery and pouch case

Additional Information:

• Item Code: MO300

• Relative pin less moisture reading for non-invasive measurement: 0.0 to 100.0 with 0.1 resolutions
• Multifunction backlit triple LCD display
• Pin less measurement depth: 0.78" (20 mm) to 1.6" (40 mm) below the surface
• High frequency sensing technology
• Automatic Data Hold
• Two adjustable alarm levels with audible beeper and visual (flashing “RISK” or “WET”) indicators
• Automatic calibration (in dry air) when meter is powered on
• Low battery indication, Auto Power off
• Complete: 3 AA batteries and pouch case

Combination Pin/Pinless Moisture Meter which measures Relative Moisture in wood and other building materials using pinless technology plus % of Moisture in sheetrock and other materials using direct pin method. Measurements are displayed on a digital LCD with backlighting and a tri-color LED bargraph. Pinless non-invasive measurement depth to 0.75 in. (22mm) below the surface. In addition, a remote pin probe is included to measure moisture in difficult to access places. Complete with 9-Volt battery, replacement pins, remote pin probe, protective cap, and pouch case.

• Choice of measuring moisture in wood and other building materials with pinless technology or use traditional remote pin probe (included)
• %WME (wood moisture equivalent) pin moisture reading
• Relative pin less moisture reading for non-invasive measurement
• Digital LCD readout with backlighting feature and tri-color LED bar graph
• Quickly indicates the moisture content of materials
• Pin less measurement depth: 0.75" (22 mm) below the surface
• Electro-magnetic sensing technology
• Built-in calibration check
• Replaceable measurement electrode pins
• Includes remote pin probe to measure moisture in difficult to access areas
• Complete with 9V battery, remote pin probe, replacement pins, protective cap, and hard carrying case

Additional Information:

• Item Code: MO265

• Non-invasive measurement to monitor moisture in wood and other building materials
• Select: 10 wood types and measurement ranges
• Measurement depth: 0.75" (20 mm) below the surface
• LCD displays % moisture of wood or material being tested

Additional Information:

• Item Code: MO280

• Displays moisture in wood and other building materials plus Air Temperature and Relative Humidity
• Digital LCD readout with analog bargraph and numerical displays
• Simultaneous digital readout of moisture content plus ambient temperature or humidity with analog bargraph display of moisture, Max moisture values, and programmable wet/dry indication
• Use on wood, paper, wall board, sheet rock, cardboard, plaster, concrete, and mortar
• Memory contains 3 wood groups and 4 building material groups with calibrations for approximately 150 species of wood and 19 building material types
• Index Mode with programmable high and low values can be used to quickly locate moisture with comparative measurement.

Additional Information:

• Item Code: MO230